New technology has allowed Sof’Fall to build the safest option for your children to play on. With all that is out there we can no longer settle for sub-par surfacing.

Accessibility

It’s important for Salt Lake City playgrounds to be places where all kids can enjoy themselves. Children who use wheelchairs, walkers, and canes must expend a lot of effort to move through sand. They might be exhausted and frustrated before they even reach the play equipment. When installed correctly, Sof’Fall wood chips provide a sturdy surface that meets ADA (Americans with Disabilities Act) Standards. 

Safety

Safety is a priority for Sof’Fall, which is certified with the NPSI (National Playground Safety Institute). The greatest danger to kids on Salt Lake City playground equipment is falling. Falls account for 75% of playground injuries, so soft playground surfaces are essential. A Sof’Fall surface goes above and beyond playground safety requirements, cushioning falls from up to a height of 25 feet.

Sof’Fall chips are made in the USA from non-toxic, non-flammable virgin wood. Unlike recycled wood, it is not treated with chemicals. 

Kids can get rowdy, and no one wants sand in their eyes. Fortunately, fibrous Sof’Fall wood chips don’t hurt when thrown. They have been cured in a kiln, which makes them softer and helps them retain moisture.

Sof’Fall Inc. is certified by the International Play Equipment Manufacturer’s Association, an organization that promotes safety in play environments.

Cleanliness

The biggest complaint about sand is the mess. Sand conceals trash easily. Dogs and cats treat it as a litter box. Its tiny grains get inside clothes and shoes, ending up all over the car and the house. 

A Sof’Fall playground is cleaner, and it will typically have a drainage system to siphon off extra moisture.

Appearance

Sand is easily blown around by the wind. It gets mixed up with dirt and other foreign objects, creating an unattractive play zone. Sof’Fall is composed of virgin wood fibers that look natural in any Salt Lake City play environment.

Financial 

Sof’Fall chips are the key component to low maintenance, soft playground surfaces that won’t strain the budget. As a surface material, Sof’Fall allows more room for the best Salt Lake City playground equipment, with less upkeep than a sand playground. 

Sof’Fall carries $10 million in liability insurance. Their comprehensive Play Protection Plan is one of the best in the business; they boast a 10 year warranty and world class customer service

NEW TECHNOLOGY FOR PLAYGROUND SAFETY: Industry leading companies like Sof’Fall are helping to provide safer parks for our children to play on. An increase in playground safety can lead to increases in playground attendance and satisfaction. 

1) Electronic Interactive Play

Are you worried that your kids are always fixated on the television screens for most parts of their free days? Well, you need to relax as there are plenty of games that they play outside and still get the thrill that comes with engaging in computer games. Electronic Interactive Play is, without a doubt, one of the most engaging outdoor games that parks are incorporating in their playgrounds. The game tests speed, alertness, and coordination of the players.

2) PlayGrounds For All

Research shows that people of all ages are interested in participating in outdoor games. As a result, they have customized playground surfaces with non-toxic materials that ensure that people of different age groups can engage in outdoor sports. The move is proving to be successful as many people are embracing engaging in sporting activities as part of trying to control many of the common lifestyle induced ailments such as obesity.

3) Sensible and engaging games

The primary aim of games is to deliver a particular result to the participant. Many of the playgrounds in Salt Lake City have realized that there is a need for sports to be engaging in such a way that they enable the kid’s senses to grow. On that light, many playgrounds are introducing musical instruments, water features, rotating play equipment, and many other objects that will keep the kids engaged and in the process lead to holistic development.

4) Introduction To New Playground Equipment

Children require adventurous and challenging games on their day to day play. This will enable them to grow to responsible individuals who can face issues head-on without fear. Most playgrounds have realized this and as a result, rolled out games such as sky-high climbing nests that require expertise to engage in. Participation in such games has enabled the kids to hone their creativity.

The bottom line for many playgrounds is that they need to be upgraded to meet the desires of those for whom they were intended. Another big upgrade a lot of parks need is to have a safe and soft playground surfacing. By improving both safety and entertainment levels of our parks we can get more people outside benefitting from the joys that parks were designed to give us.

When the amount of Sof’Fall drops below certain levels the Play Protection Warranty is no longer valid. Be familiarized with your warranty plan to make sure you never drop below that level. 

Calculating For Sof’Fall Installation

Installing Sof’Fall on any playground requires attention to detail but will certainly pay dividends. When considering the area you would like to fill, consider two calculations. Consider the needed square footage. Then, add in 30% more for compaction when calculating your total amount. Do this by dividing your square footage by .2025. This calculation will give you the number of cubic yards that you need when taking into account compaction.

Maintenance and Care

One thing to remember is that anytime the fill level drops below the fill line the Play Protection Plan Warranty is no longer active. So, being aware of factors that can cause compaction is important.

• Be aware of a large fill area. More edges mean more fill gets tracked off the playground.
• Weather, wind, and rain can cause shift and compaction.
• Watch  high-traffic parks with care. Frequently used playgrounds require fills more often.
• Know that mixing playground soft surfaces with Sof’Fall can also void your warranty.
• As seen in Salt Lake City’s parks system, ADA compliance easily leads to compliance with your Sof’Fall warranty. Learn to stabilize surfaces to be slip resistant. Make the width between gates a least three feet wide.

Sof’fall Safety

Having a safe place to play comes down to two realities. They are a well-designed environment and safe playground material. Sof’Fall and Sof’Bounce compliment that by design. They are manufactured with high-quality concern to safety and preservation.

With Sof’Fall the inherent cost comes from using virgin wood. The long term protection is in not using recycled wood products. Frequently filled with insecticides and arsenic compounds, these wood by-products are not able to claim to be toxic free.

As you plan for your park make sure you keep compaction in mind. It is important for the safety of the children who will be playing there. Review the material of the Sof’Fall Warranty to know how often you will need to top off your playground surface. Being on top of these things will save you money in the long run and provide a safe place to play both now and in the future.

Sof’Fall Engineered wood surface is 100% ADA compliant and fully approved by multiple organizations that govern playground equipment safety. 

Accessible Routes

Outside of the play area, the soft playground surface must be stable, slip resistant and at least three-feet wide. Any grates or openings should be no larger than a half-inch, and the same goes for any changes in level.  On the way into the play area there shouldn’t be any objects that protrude onto the path more than four inches. This includes drinking fountains or signs.

The Play Area

Inside the play area, playground materials need to be easy for children using mobility devices or wheelchairs to traverse, Thus, there should be a 50/50 split between elevated and ground level components. Those higher items should be accessible via low-grade ramps. All surfaces should be examined through standards developed by the American Society for Testing and Materials (ASTM). In reviewing components, ASTM looks at the minimum characteristics and performance needed to be ADA compliant.

“Finding a safe place for our children to play needs to be a priority. Not just for our children, but for all children.”

Some of the most common ADA compliant playground materials include wood fiber or carpet, a rubber surface, and synthetic turf. When making a determination on the structure materials, items like weather and environment need to be examined.

For instance, a playground may not be ADA compliant if the materials get too hot in direct sunlight. In another example, changes may need to be made if the ground surfaces are not moisture absorbent.>

Becoming ADA Compliant

In many cases, it costs developers between $60,000 to $100,000 to make a playground ADA compliant. So, they may decide to do a partial update for access. Or they may not do one at all.

Should visitors feel a playground isn’t ADA compliant they need to report it. If the playground is based in a private business — for example, a preschool — it needs to be discussed with management. If it’s part of a park, then reports or complaints need to go to the township, county, or state

Should the issue not be resolved at those levels, then a complaint can be filed at the federal level. ADA.gov has information on how to register this with the Civil Rights Division of the U.S. Department of Justice.

In the end, all children have the right to enjoy a playground. If they have trouble on their own or with mobility devices, then this needs to be addressed. For play helps them build confidence and happiness for a better life.